|
·
Chitarra
Pasta made with a Chitarra is very light, it cooks very
quickly, and absorbs more sauce, and has some conveniences over mechanically
cut pasta.
♦ Flour it generously and the strands won't stick.
♦ Use the board to transfer the cut pasta directly to the boiling water.
♦ Or dry or freeze the pasta for future use.
♦ A mechanical pasta makers is handy for rolling the dough into a width that
will neatly fit over the Chitarra strings.
♦ Cut a
rolled sheet of pasta dough to fit over the wires.
♦ Generously sprinkle flour on both sides of
the sheet.
♦ Place the sheet over the metal wires.
♦ Roll a rolling pin over it with
light-to-moderate pressure.
♦ Slide out the board, and slide the pasta
right into the boiling water.
♦ The pasta will cook faster, and absorb more sauce, than
pasta made any other way.
 |
Imperia 150 Pasta Maker $54.99
#7123
|
5-5/8" cutting width,
5-1/2" wide rollers
- Manufactured since 1935 and first carried by us in the late 1950's,
- Removable double cutter head for spaghetti (2 mm-1/16") and fettuccine
(6.5 mm-1/4"),
- Locking dough roller adjustment dial with 6 thickness settings,
- Beechwood grip handle,
- Table clamp,
- Directions/recipe book,
- Chrome plated steel body, rollers and cutters, with carbon steel
gearing,
- 1 year limited warranty for home use
 Made
in Italy
Instructions on use and care,
plus recipes. |
| |
Imperia Capelli D'Angelo Attachment
$24.99
#7124
|
1.5 mm
Thin Angel Hair strands
c. 1/16"
Made
in Italy |
| |
Imperia Tagliatelle Attachment $24.99
#7127
|
2 mm (comes with machine)
Spaghetti size
c. 3/32"
Made
in Italy |
| |
Imperia Round Spaghetti Attachment
$24.99
#7126
|
2 mm diameter
c. 3/32"
Made
in Italy |
| |
Imperia Trenette Attachment $24.99
#7125
|
4 mm
Thin fettuccine
c. 5/32"
Made
in Italy |
| |
Imperia Fettuccine Attachment $24.99
#7116
|
6.5 mm (comes with machine)
"Noodles"
c. 1/4"
Made
in Italy |
| |
Imperia Lasagnette Attachment $24.99
#10420
|
12 mm
Tiny lasagne
c. 1/2"
Made
in Italy |
 |
Imperia Papperdelle Attachment $29.99
#7141
|
32 mm
Small lasagne
c. 1-1/4"
Made
in Italy |
 |
Imperia Double Attachment $31.99
#8307
|
2 mm and 6 mm
c. 3/32" and 1/4"
Made
in Italy |
 |
Imperia Double Attachment $34.99
#11498
|
1.5 mm Angel Hair cutter and 6.5 mm Fettuccine cutter
c. 1/16" and 1/4"
Made
in Italy |
 |
Imperia Ravioli Attachment $49.99
#8361
|
3 in a row
Ravioli
30mm/1.25"
Made
in Italy |
 |
Imperia Replacement Clamp $9.99
#9822
|
Allows for clamping to counter up to 2" thick,
Plated steel
Made
in Italy |
 |
Imperia Replacement Handle $9.99
#9826
|
Wood and plated steel
Made
in Italy |
 |
Imperia Pasta Facile Motorizer $84.99
#7138
|
Especially made for Imperia pasta makers.
2 speeds plus pulse,
110v 60hz 80 watts
(Pasta Facile Use & Care
Instruction)
(Note: Speeds are intentionally slow for easier feeding of dough.
Motor is noisy.) |
Top
 |
Atlas 150 Pasta Maker $54.99
#8845
|
5-5/8" cutting width,
5-5/8" wide rollers
- Made by the Marcato family, the largest manufacturer of pasta machines
worldwide. All components are made in their own factory.
- Chromed steel body,
- Nickel plated steel rollers,
- Anodized cutters,
- Case-hardened tempered steel gears,
- 9 thickness settings (0.3 to 2.5 mm) on regulating knob,
- Comes with a double attachment (2 mm round and 5 mm flat),
- Chromed steel handle and clamp with ABS hand grips,
- Instructions for use & basic recipe included;
-
Made in Italy;
- 3 year limited warranty for home use
(Instructions on use and care) |
 |
Atlas 150 Attachments and
Accessories |
Cutters and accessories are 150mm wide and fit in the
slots where the double cutters (standard accessory) are installed. Turn
with the standard handle or with the Pastadrive
Electric Motor. |
 |
Atlas 150 Ravioli Attachment $44.99
#55781
|
Makes 1-1/2" x 2" ravioli,
Scoop, instructions and recipes included
Made
in Italy
(Instructions) |
 |
Atlas 150 Ravioloni Attachment $54.99
#66066
|
Makes triangular ravioli
Rolling cutter included
Made
in Italy |
 |
Atlas 150 Cannelloni Attachment #7181
Discontinued by Marcato |
Makes 3.5" long by 1.5" wide cannelloni
Rolling cutter included
Made
in Italy |
| |
Atlas 150 Trenette Attachment $29.99
#9075
|
3 mm.
Thick spaghetti
c. 1/8"
Made
in Italy |
 |
Atlas 150 Capelli D'Angelo/ AngelHair
Attachment $29.99
#8796
|
1 mm.
Thin angel hair strands
c. 3/64"
Made
in Italy |
 |
Atlas 150 Vermicelli Attachment $29.99
#120698
|
1.5 mm.
Thin round spaghetti
c. 1/16"
Made
in Italy |
 |
Atlas 150 Round Spaghetti Attachment
$29.99
#10520
|
2 mm. diameter
c. 3/32"
Made
in Italy |
 |
Atlas 150 Spaghetti Alla Chitarra
$29.99
#11946
|
2 mm.
Flat spaghetti
c. 3/32"
Emulates the smaller cut on the Chitarra
Made
in Italy |
 |
Atlas 150 Linguine Attachment $29.99
#11948
|
3 mm.
Thin, slightly rounded fettuccine
c. 1/8"
Made
in Italy |
 |
Atlas 150 Lasagne Ricce Attachment
$29.99
#10521
|
8 mm.
Wavy edged
c. 3/8"
Made
in Italy |
 |
Atlas 150 Lasagnette Attachment $29.99
#9081
|
11 mm.
c. 7/16"
Made
in Italy |
 |
Atlas 150 Lasagne Ricce Attachment
$29.99
#10519
|
12 mm.
Wavy edged
c. 1/2"
Made
in Italy |
 |
Atlas 150 Pappardelle Attachment $29.99
#10518
|
50 mm
Ridged lasagne
c. 2"
Made
in Italy |
 |
Atlas 150 Double Cutter $39.99
#16083
|
1.5 mm spaghetti and 6.5 mm linguine flat cutters
c. 1/16" and 1/4"
Made
in Italy |
 |
Atlas Replacement Clamp $10.99
#14899
|
Plastic and chrome plated steel,
Made to clamp onto a countertop that is up to 2" thick
Made
in Italy |
 |
Atlas Replacement Handle $8.99
#14898
|
Plastic and chrome plated steel
Made
in Italy |
 |
Marcato Pastadrive Electric Motor
$84.99
#8817
|
- Motor can be used with all Marcato pasta machines
(such as Atlas and Ampia) that bear the CE safety seal or that were
manufactured after Sept. 1998 (look underneath the unit for the Month
and Year).
(Inquire about a $13.99 conversion
kit that is available for use on older Atlas models. It consists of
replacement covers for the sides of the pasta maker and one for the
double cutters. The motor will not work with any other attachments made
prior to Sept. 1998.)
- 2-speeds,
- UL Listed 110v 60hz 100 watts,
- 3 year limited warranty for home use
Made
in Italy
(Instruction
Manual - PDF 801 KB) |
Top
 |
Imperia Restaurant Manual Pasta Maker
Body, R220 $599.99
#7872
|
8.25" wide rollers,
Regulator knob with 10 thickness settings,
5 mm maximum rolled sheet thickness,
Cutter attachments not included; purchase separately (see
below),
Unit is 13" wide, 9.5" high, 8" deep,
Tray extends 8"
Chromed steel body,
Tempered steel gears turn on ground pins,
Self-lubricating bearings,
Weighs 23 lbs
Made
in Italy
1 year limited warranty
(Manual & Parts List - PDF 2.65MB)
(Expedited Shipping NOT available on this item.) |
| |
#1 Angel Hair Simplex Attachment for
Imperia Restaurant Pasta Maker $149.99
#7874
|
1 mm wide cutters
For R220
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
#2 Tagliatelle Simplex Attachment
for Imperia Restaurant Pasta Maker $149.99
#7875
|
2 mm wide cutters
For R220
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
#3 Trenette Simplex Attachment for
Imperia Restaurant Pasta Maker $149.99
#7877
|
4 mm wide cutters
For R220
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
#4 Fettuccine Simplex Attachment for
Imperia Restaurant Pasta Maker $149.99
#7878
|
6.5 mm wide cutters
For R220
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
#5 Lasagne Simplex Attachment for Imperia
Restaurant Pasta Maker $149.99
#7879
|
12 mm wide cutters
For R220
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
Large Handle for Imperia Restaurant Pasta
Maker $25.99
#7866
Temporarily unavailable
|
Part C on diagram at left
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
Small Handle for Imperia Restaurant Pasta
Maker Same as handle for Imperia 150.
(See above.) |
Part E on diagram at left
Made
in Italy
(Expedited Shipping NOT available on this item.) |
| |
Clamp for Imperia Restaurant Pasta Maker
$29.99
#120925
|
Part D on diagram on left
Made
in Italy
(Expedited Shipping NOT available on this item.) |
Top
Electric Kneaders
 |
Atlas Electric Pasta Maker R140
Currently unavailable and, we are told, being redesigned by the
manufacturer. |
12.25" x 6" base,
8" high,
Includes:
Flat roller,
1/16" cutter,
1/4" cutter,
5-5/8" rolling/cutting width,
Kneads 1 Lb of pasta,
Rated 100-120vac, 60 Hz, 150 Watts, 2 Amps
2 year warranty
Made
in Italy
Instructions and
Schematic Drawing |
 |
Atlas R140 Capelli D'Angelo Attachment
$39.99
#3591
|
1mm wide cuts
Made
in Italy |
Cavatelli / Gnocchi
 |
Gnocchi Board $3.99
#7110
|
8" long,
2.4" x 4.75" rolling area,
Natural hardwood
Made
in Italy
(More paddles on Butter page.) |
Fusilli
 |
Fusilli Iron $1.99 each
#FUSILLI
|
1/8" Square
13" Long
Chromed steel |
Top
CHITARRA
RE-STRINGING:
- We re-string only chitarras that have a metal/wood frame
and that are 2-sided, like the one shown at the top of this page.
- We do not re-string chitarras that have an entirely wooden frame,
or that are one-sided, as they tend to literally buckle under the
pressure.
- The cost is $15.99 plus Shipping (and
Sales Tax in PA).
- Insure and Ship to:
Fante's - Att: Chitarra Re-Stringing
908 Carpenter St
Philadelphia, PA 19147
- Include a note with:
Your name
Your return street address
Your phone number
- Include a check for:
$15.99 plus
Shipping charge, plus
Sales Taxes if we're returning it to a PA address
- If you prefer to use a Credit Card (Visa, MC, Amex):
Include on your Note: the card number, expiration date,
and signature, or
Call us in advance with that info: 800-44-FANTE Tue-Fri
9-5 Eastern Time
- Allow 3-4 weeks.
Nostalgia
 |
DeLonghi PM1000 Electric Pasta Maker
Currently not being manufactured |
1 to 2 lb capacity,
Use up to 2 lbs regular flour,
12-1/2 x 7 x 10-1/2" high overall,
7 extruding discs included:
Spaghetti, bucatini, lasagne, maccheroni, tagliatelle, gnocchi,
biscotti,
Additional discs available from DeLonghi,
Discs are interchangeable with Simac, Lello and Cuisinart,
Essential measuring container and recipe book,
All removable parts are dishwasher safe,
Automatic safety off lid-switch,
Heavy duty die cast aluminum gears,
UL Listed 120v, 60hz, 250 watts,
1 year limited warranty
Italy |
 |
Simac PastaMatic MX700 Electric Pasta
Maker
Currently not being manufactured |
Click here for Use & Care
Directions, Hints, Specs, Replacement Parts, Recipes, etc. |
 |
BeeBo Cavatelli Maker
Currently not being manufactured |
9-1/2" long overall,
4-5/8" round head,
Clamps onto counter or table that is up to 1-1/4" thick,
Made from the original Berarducci Bros. mold,
Cast aluminum alloy body, nickel plated steel parts, wooden rollers,
plastic handle knob
China
- Clamp cavatelli maker to a table or dough board.
- Flour the rollers well.
- Roll dough about 3/8" thick and flour well.
- Cut 1/2" to 3/4" wide. Insert one end of strip into wooden rollers and
turn handle. The faster you turn (ok, there's a limit to how fast), the
less the sticking.
- Cook right away or refrigerate or freeze.
- Never immerse in water; just brush off the excess flour and store.
(Directions
& Recipes - PDF 733 KB) |
|
CHECKOUT
Hand made in the US
